High-speed fastening
Continuous operation increases line throughput.
DA-8000Fastening
High-Spec Nailless Plywood Box Buckle Machine
Fastens plywood box panels with steel buckles — no nails, no split panel edges, no fumigation dependency.
30–60/min9,000 mm assembly6 kW
Also known as
steel buckle machineplywood box buckle machineautomatic steel buckle machineplywood box steel buckle machinesteel buckle machine for plywood boxsteel buckle pressing machinenailless box making machinenail-free plywood box machineplywood box fastening machinewooden box fastening machineplywood box assembly machinebuckle box machineplywood box crimping machine
These are the terms overseas buyers use for this machine. They describe naming variants, not additional specifications.
At a glance
| Motor power | 6 kW |
|---|---|
| Fastening speed | 30–60/min |
| Applicable steel-strip width | 50 mm |
| Max. assembly length | 9,000 mm |
| Machine weight | 1,000 kg |
Overview
The DA-8000 is the first stage of the production line. It presses metal fasteners into plywood at programmed positions to create a consistent base for steel-edge assembly, with a Siemens PLC control system, INOVANCE servo drive and a 120 kg hydraulic die assembly.
Key advantages
Precision positioning
Consistent locations reduce assembly variation.
Operator safety
Emergency stops and photoelectric sensors protect operators.
Flexible setup
Adapts to different panel and fastener specifications.
Core configuration & technical specifications
| Motor power | 6 kW |
|---|---|
| Fastening speed | 30–60/min |
| Applicable steel-strip width | 50 mm |
| Max. assembly length | 9,000 mm |
| Machine weight | 1,000 kg |
Supplementary technical data
Component, dimension and configuration data supplied with a written quotation. These figures are additional technical information and are not part of the published product brochure.
| PLC control system | Siemens PLC control system (Germany) |
|---|---|
| Hydraulic die assembly | 120 kg hydraulic die assembly |
| Compatible plywood thickness | 5–12 mm |
| Servo drive | INOVANCE |
| Servo motor | INOVANCE |
| Planetary gearbox | Zhongda Leader |
| Die discharge opening | 3× enlarged outlet, export configuration |
| Bearings | 304 stainless steel |
| Fastening screws | 304 stainless-steel screws |
| Springs | DAIDO (Japan) |
| Electrical components | CHINT |
| Power-connection switch | XINLING |
| Dust protection | Dust-resistant machine design with protective cover |
| Machine dimensions (L × W × H) | 2,450 × 800 × 1,600 mm |
| Recommended floor space | 3 × 3 m |
Standard operating sequence
- 01Automatic feedingGalvanized steel strip is delivered to the specified position.
- 02Panel positioningThe panel is clamped and aligned accurately with the die.
- 03Powered fasteningThe punch inserts and secures the fastener in one action.
- 04Reset & transferThe punch resets and the workpiece advances to the next cycle.
Included in the scope of supply
- One feeder
- One feed support stand
Where this machine fits
Related equipment
Other stages in the line
GA-8000Forming
Steel Edge Plywood Box Machine
Punches and cuts coiled steel strip into uniform steel edges for plywood box panels.
Six-year die warrantyOMRON PLCSKD51 punch
GA 2.5 mPressing
Steel-Edge Hydraulic Press
Joins preformed steel edges with prepared plywood under stable hydraulic force for flat, rigid, dimensionally consistent panels.
30 t press force2.5 m working widthMagnetic die
Turnkey LineTurnkey
Turnkey Line
Three core machines — buckle fastening, steel-edge forming and hydraulic pressing — from one accountable partner.
3 core machines3-stage system3-year warranty
Further reading
Guides that answer what this page cannot
Each of these was written for a question that arrives before a specification does. The articles are ordered by how specifically they address this machine, then by date.
Crate assembly on site: putting a flat-packed plywood box together
Crate assembly is a short job with one irreversible step, and the mistakes that matter are made in the first ten minutes. A flat-packed box is only as square as its base when the walls go on.
Wooden box maker, box factory or machine supplier: who actually makes what
The same three words describe a workshop, a factory and an equipment builder. Confusing them costs weeks of enquiries, because only one of the three can quote a machine.
Blocking and bracing inside an export crate: what actually holds the load
Blocking and bracing is specified after the crate has been designed, which is the wrong order. If the bracing has nothing sound to attach to, no amount of dunnage will hold the load.
Container rain: why a crate arrives wet inside a dry container
Container rain is condensation that forms inside a container during a voyage and falls on whatever is stacked at the top. The water was never outside the box; it was carried in by the packing.
Equipment questions
We do not publish prices, because the configuration changes with your box sizes, panel thickness and destination. The line is supplied as three matched machines — the DA-8000 buckle machine, the GA-8000 steel-edge forming machine and the Steel-Edge Hydraulic Press — and every figure in a quotation is listed line by line. Send your box sizes and target output and you will get a written quotation against them.
A manufacturer. The company is Zhucheng Zhiwei Industrial Equipment Co., Ltd. of Zhucheng, Shandong, China, founded in March 2023, operating a 5,000 m2 production base, holding more than 30 technical patents and CE / ISO certified for its systems.
Yes. Each of the three core machines is quoted with its own technical specification sheet, so you can buy only the production stage you are missing.
Yes. The dies, the press working width and the platen size are matched to your box dimensions, and the recommended floor space for each machine is set out before shipment.
Three things: the box sizes you build, the plywood thickness you use, and the production stages you need. Add your target output and the destination port if you have them, and we will come back with the machine configuration and a line-by-line quotation.
Both. The line is supplied as three matched machines — DA-8000 buckle machine, GA-8000 steel-edge forming machine and Steel-Edge Hydraulic Press — and each machine also carries its own technical specification sheet if you only need one stage.
Under normal operating conditions, electrical control components are covered for 3 years.
The DA-8000 nailless plywood box buckle machine is specified for plywood from 5 mm to 12 mm. Tell us the panel thickness and box sizes you build so we can confirm the configuration.
The DA-8000 fastens at 30 to 60 fasteners per minute. Achievable line output depends on box size, panel handling and how many operators you run — send us your box dimensions and target output and we will set out what the configuration can achieve.
Recommended floor space is 3 × 3 m for the DA-8000, 5 × 2 m for the GA-8000 and 3 × 3 m for the quoted 2.5 m press configuration. Machine dimensions for every unit are listed in its specification table.
Rated power is 6 kW for the DA-8000 and the GA-8000. The GA 2.5 m press build is quoted at 3 kW; the brochure states the press series at 12–15 kW. Voltage and phase are confirmed against your site before order.
Send us the box you need to build
Box sizes, panel thickness and the production stages you need are enough for us to come back with a configuration and a written quotation.