One partner
Three stages specified and supplied against a single line plan.
Turnkey LineTurnkey
Plywood Box Production Line
Three core machines — buckle fastening, steel-edge forming and hydraulic pressing — from one accountable partner.
3 core machines3-stage system3-year warranty
Also known as
plywood box production lineplywood box making production lineplywood box manufacturing lineplywood packaging box production linenailless plywood box production linenailless box production linewooden box production linewooden crate production linesteel edge box production linesteel belt box production linesteel edge box machinesteel belt box machinesteel edge box making machinesteel belt box making machineplywood box machineplywood box making machineplywood box manufacturing machinewooden box making machinewood box making machinewooden box machinerynailless plywood box machineplywood box machining linewooden box machine
These are the terms overseas buyers use for this machine. They describe naming variants, not additional specifications.
At a glance
| Production sequence | Fastening → Forming → PressingThe standardized production system |
|---|---|
| Core machines | 3 unitsDA-8000 buckle machine, GA-8000 steel-edge forming machine and the Steel-Edge Hydraulic Press |
| Turnkey line | 3 unitsThese three machines are supplied as one matched line |
| Warranty | 3 yearsElectrical control components, under normal operating conditions |
| Support scope | Selection → installation → commissioningWith after-sales support, per the company brochure |
Overview
This steel edge plywood box production line runs the standardized production system in three stages: buckle fastening, steel-edge forming and hydraulic pressing. The three machines are quoted as one line so the dies, the press working width and the floor layout are matched to each other before the machines ship. One manufacturer, three core machines, one steel edge plywood box production line.
Key advantages
Coordinated workflow
Fastening output feeds edge forming and pressing in sequence.
Consistent finished quality
Dies and press settings are matched before shipment.
Core configuration & technical specifications
| Production sequence | Fastening → Forming → PressingThe standardized production system |
|---|---|
| Core machines | 3 unitsDA-8000 buckle machine, GA-8000 steel-edge forming machine and the Steel-Edge Hydraulic Press |
| Turnkey line | 3 unitsThese three machines are supplied as one matched line |
| Warranty | 3 yearsElectrical control components, under normal operating conditions |
| Support scope | Selection → installation → commissioningWith after-sales support, per the company brochure |
Production sequence
- 01Buckle fasteningSteel buckles are pressed into the plywood at programmed positions.
- 02Steel-edge formingCoiled steel strip is cold-rolled into the box edge profile.
- 03Hydraulic pressingThe formed edge is joined to the panel under controlled pressure.
Where this machine fits
Related equipment
Other stages in the line
DA-8000Fastening
Nailless Buckle Machine
Fastens plywood box panels with steel buckles — no nails, no split panel edges, no fumigation dependency.
30–60/min9,000 mm assembly6 kW
GA-8000Forming
Steel Edge Plywood Box Machine
Punches and cuts coiled steel strip into uniform steel edges for plywood box panels.
Six-year die warrantyOMRON PLCSKD51 punch
GA 2.5 mPressing
Steel-Edge Hydraulic Press
Joins preformed steel edges with prepared plywood under stable hydraulic force for flat, rigid, dimensionally consistent panels.
30 t press force2.5 m working widthMagnetic die
Further reading
Guides that answer what this page cannot
Each of these was written for a question that arrives before a specification does. The articles are ordered by how specifically they address this machine, then by date.
Wooden box maker, box factory or machine supplier: who actually makes what
The same three words describe a workshop, a factory and an equipment builder. Confusing them costs weeks of enquiries, because only one of the three can quote a machine.
Blocking and bracing inside an export crate: what actually holds the load
Blocking and bracing is specified after the crate has been designed, which is the wrong order. If the bracing has nothing sound to attach to, no amount of dunnage will hold the load.
Container rain: why a crate arrives wet inside a dry container
Container rain is condensation that forms inside a container during a voyage and falls on whatever is stacked at the top. The water was never outside the box; it was carried in by the packing.
Crate disposal after delivery: four routes, and the design decision behind each
Crate disposal is usually treated as someone else's problem at the receiving end, which is why it costs more than it should. The route a box can take is fixed when it is designed.
Equipment questions
We do not publish prices, because the configuration changes with your box sizes, panel thickness and destination. The line is supplied as three matched machines — the DA-8000 buckle machine, the GA-8000 steel-edge forming machine and the Steel-Edge Hydraulic Press — and every figure in a quotation is listed line by line. Send your box sizes and target output and you will get a written quotation against them.
A manufacturer. The company is Zhucheng Zhiwei Industrial Equipment Co., Ltd. of Zhucheng, Shandong, China, founded in March 2023, operating a 5,000 m2 production base, holding more than 30 technical patents and CE / ISO certified for its systems.
Yes. Each of the three core machines is quoted with its own technical specification sheet, so you can buy only the production stage you are missing.
Yes. The dies, the press working width and the platen size are matched to your box dimensions, and the recommended floor space for each machine is set out before shipment.
Three things: the box sizes you build, the plywood thickness you use, and the production stages you need. Add your target output and the destination port if you have them, and we will come back with the machine configuration and a line-by-line quotation.
Both. The line is supplied as three matched machines — DA-8000 buckle machine, GA-8000 steel-edge forming machine and Steel-Edge Hydraulic Press — and each machine also carries its own technical specification sheet if you only need one stage.
Under normal operating conditions, electrical control components are covered for 3 years.
The DA-8000 nailless plywood box buckle machine is specified for plywood from 5 mm to 12 mm. Tell us the panel thickness and box sizes you build so we can confirm the configuration.
The DA-8000 fastens at 30 to 60 fasteners per minute. Achievable line output depends on box size, panel handling and how many operators you run — send us your box dimensions and target output and we will set out what the configuration can achieve.
Recommended floor space is 3 × 3 m for the DA-8000, 5 × 2 m for the GA-8000 and 3 × 3 m for the quoted 2.5 m press configuration. Machine dimensions for every unit are listed in its specification table.
Rated power is 6 kW for the DA-8000 and the GA-8000. The GA 2.5 m press build is quoted at 3 kW; the brochure states the press series at 12–15 kW. Voltage and phase are confirmed against your site before order.
Send us the box you need to build
Box sizes, panel thickness and the production stages you need are enough for us to come back with a configuration and a written quotation.