Turnkey LineTurnkey
Turnkey Line
Three core machines — buckle fastening, steel-edge forming and hydraulic pressing — from one accountable partner.
3 core machines3-stage system3-year warranty
Plywood box machinery manufacturer · Shandong, China
Plywood box machine: three machines, one matched line
ZHIWERKS builds the three machines that form one complete plywood box production line: a nailless (nail-free) steel buckle machine, a steel edge forming machine that rolls galvanised steel strip — also called steel belt or steel belted — into the panel edge, and a hydraulic press. Buy the stage you are missing, or take the turnkey line.
- Siemens & OMRON PLC control
- INOVANCE servo drive
- 3-year electrical warranty
- Export packing configuration
3machinesCore machines, one matched line
100tHydraulic press range, up to
5,000m²Production base
30+patentsTechnical patents
What we make
Three core machines, one complete production line
Buckle fastening, steel-edge forming and hydraulic pressing. Buy the stage you are missing, or take the three-machine line that has already been matched to itself.
DA-8000Fastening
Nailless Buckle Machine
Fastens plywood box panels with steel buckles — no nails, no split panel edges, no fumigation dependency.
30–60/min9,000 mm assembly6 kW
GA-8000Forming
Steel Edge Plywood Box Machine
Punches and cuts coiled steel strip into uniform steel edges for plywood box panels.
Six-year die warrantyOMRON PLCSKD51 punch
GA 2.5 mPressing
Steel-Edge Hydraulic Press
Joins preformed steel edges with prepared plywood under stable hydraulic force for flat, rigid, dimensionally consistent panels.
30 t press force2.5 m working widthMagnetic die
Production sequence
Three core machines, one standardized production system
Buckle fastening, steel-edge forming and hydraulic pressing run in sequence. Each machine hands a matched part to the next one, which is why the line is specified as a whole.
Buckle fastening
Fastens plywood box panels with steel buckles — no nails, no split panel edges, no fumigation dependency.
Edge forming
Punches and cuts coiled steel strip into uniform steel edges for plywood box panels.
Hydraulic pressing
Joins preformed steel edges with prepared plywood under stable hydraulic force for flat, rigid, dimensionally consistent panels.
Applications
What the boxes carry
The box is specified by its load, its handling route and its destination — not by a generic size chart.
Machinery & Heavy Equipment Packaging
Steel-edged plywood boxes carry the weight and the point loads that industrial machinery puts on export packaging.
Automotive Components
Dense, high-value parts need packaging that holds its shape through multi-leg logistics.
Electronics & Battery Packaging
Lithium battery and electronics exports need packaging that is documented, consistent and sealed.
Logistics & Reusable Packaging
Returnable and knock-down plywood boxes cut packaging cost across repeated shipments.
Electrical Equipment & Switchgear Packaging
Switchgear, control cabinets and motors ship as heavy, top-heavy assemblies that have to arrive dry, square and unmoved.
Crating Services
What a crating operation needs in order to make its own boxes: the three production stages, the floor space they take and the constructions they can offer.
Box types
Start from the box, not the machine
Each box construction decides which production stages you need. These pages explain the constructions and the machines that cover each step.
Steel-Edged Plywood Box
Rigid protection for industrial transport — plywood panels with a rolled steel edge.
Buckle Box
Quick assembly for repeated circulation — panel joints locked by steel buckles, not nails.
Foldable Box
Saves storage and shipping space — a plywood box that folds flat for the return leg.
Clip-Lock Steel-Edge Box
A plywood box whose panels are locked together by male-and-female steel clips instead of nails, so it assembles without tools and comes apart again for the return leg.
How we work
From box drawing to a quoted machine configuration
Configuration is driven by the box you build: panel thickness, box size range and the production stages you already own.
Request
Send the box sizes, plywood thickness and the stages you need. We confirm the machine configuration against your box, not against a brochure.
Configuration
Dies, press working width and floor layout are matched to your panel stock, and each stage is quoted with its own specification sheet.
Delivery
The DA-8000 and GA-8000 each ship with one feeder and one feed support stand.
Guides
What buyers read before they specify a line
Six questions decide most equipment enquiries: what it costs, how many machines it takes, which box format you actually need, which strip configuration, how the joint is built or closed, and who to ask in the first place.
How much does a plywood box making machine cost? What sets the number
How much a plywood box making machine cost comes down to six scope decisions you make before anyone quotes. Ask for a price without them and you will get a number that has to be revised three times.
How many machines does a nailless plywood box production line need?
Three, in the standardized production system: buckle fastening, steel-edge forming and hydraulic pressing. Here is what each one does, why the count is three rather than one, and when buying a single machine is the right move.
Pallet collar machine or nailless box line: which one your box format needs
Three export box formats look similar on a drawing and behave nothing alike in a container. This is what a pallet collar machine, a wirebound box setup and a nailless steel-edge line each produce, and where the choice is decided.
Double hole steel strip machine or single strip: what the second row changes
Buyers use one phrase for two machines, then compare quotations that were never for the same thing. What a double hole steel strip machine is, what it is not, and when the second row is worth paying for.
Foldable box production line: what changes when the box has to fold flat
The three core stages of a nailless box line do not change when the box folds. What changes is the corner detail, and the fact that a fold line has to be produced to a tolerance rather than assembled by hand.
Wooden box maker, box factory or machine supplier: who actually makes what
The same three words describe a workshop, a factory and an equipment builder. Confusing them costs weeks of enquiries, because only one of the three can quote a machine.
Why ZHIWERKS
Specifications you can check line by line
Each machine page publishes its own specification table — components, dimensions, rated power, recommended floor space and warranty terms — so a quotation can be checked against it line by line.
Named components on every machine
Siemens and OMRON PLC control systems, INOVANCE servo drive and servo motor, Zhongda Leader planetary gearbox, DAIDO (Japan) springs, 304 stainless-steel bearings and fastening screws, CHINT electrical components, XINLING switches.
Built for export packing
The DA-8000 is supplied with a 3× enlarged die discharge outlet as an export configuration. Both the DA-8000 and the GA-8000 are dust-resistant designs with protective covers.
Three stages, one matched line
Buckle fastening, steel-edge forming and hydraulic pressing are quoted together so the dies, the press working width and the floor layout are matched before the machines ship.
2023.03Company founded
5,000m²Manufacturing base
30+Patents
CE / ISOCertification
Documents
Company and product brochure
The full company and product brochure: the machine range with its key data and standard workflows, the production sequence, the box types and the applications served.
Company & Product Brochure 2026
The full company and product brochure: the machine range with its key data and standard workflows, the production sequence, the box types and the applications served. The brochure contains no prices.
Download the PDFMachine drawings and detailed specifications
Dimensioned drawings, die details and voltage configuration for your destination are confirmed in writing with a quotation.
Request documentationQuestions buyers ask first
ZHIWERKS is the export brand of Zhucheng Zhiwei Industrial Equipment Co., Ltd. We manufacture the three core machines that form one complete steel-edged plywood box production line: the DA-8000 nailless plywood box buckle machine, the GA-8000 high-speed steel-edge forming machine and the Steel-Edge Hydraulic Press.
They are manufactured in Zhucheng, Shandong, China, at No. 2 Beihuan Road, Zhucheng Economic Development Zone.
Yes. The three machines are supplied as one turnkey line, and each machine also carries its own technical specification sheet, so a single stage can be quoted on its own.
Use the enquiry form, message us on WhatsApp +86 15527493829, or call +86 15527493829 with the box sizes, panel thickness and the stages you need. Price and lead time are confirmed in writing against your configuration and destination.
Under normal operating conditions, electrical control components are covered for 3 years.
Siemens and OMRON PLC control systems, INOVANCE servo drive and servo motor, Zhongda Leader planetary gearbox on the DA-8000, DAIDO (Japan) springs, 304 stainless-steel bearings and fastening screws, CHINT electrical components and XINLING switches.
Send us the box you need to build
Box sizes, panel thickness and the production stages you need are enough for us to come back with a configuration and a written quotation.