Choosing plywood thickness for export boxes: what 5–12 mm means on the machine
The DA-8000 is specified for plywood from 5 mm to 12 mm. What changes across that range, and what to tell a machine supplier before you order.
Resources
Articles — page 5
Process notes, material decisions and configuration questions from plywood box production — written from the equipment specifications we publish.
Fumigation-free plywood boxes: what ISPM 15 does and does not cover
Why plywood packaging is described as fumigation-free, and why the compliance decision always sits with the destination authority.
How a steel-edged plywood box is made: forming, pressing and buckle fastening
The three production stages behind a steel-edged plywood export box, and what each stage does to the panel.
Press force and die changeover on a 2.5 m steel-edge press
What 30 t of nominal press force buys you on a 2.5 m working width, and why the magnetic die system decides how often you change box size.
About these resources
Every figure is one the manufacturer publishes for the machine it describes. Where a question depends on data we do not publish — competitor equipment or comparative test results, for example — the article says so instead of estimating.
They set out the criteria and the published machine limits: plywood from 5–12 mm on the buckle machine, fastening at 30–60 per minute to a 9,000 mm assembly length, and press force from 40 to 100 tons across the press series. Send your box size range and panel thickness and we will confirm a configuration.
The right thickness depends on the load and the panel span, not on a single rule. Our published specification covers plywood from 5 mm to 12 mm on the buckle machine. Tell us what the box carries and we can work from there.
No. We publish specifications for our own equipment and criteria for choosing between methods. We do not publish performance figures for equipment we do not manufacture or test.
Send us the box you need to build
Box sizes, panel thickness and the production stages you need are enough for us to come back with a configuration and a written quotation.